欢迎光临建设行业信息网!

设为首页   加入收藏

首页>>工程机械>>产品分类>>桩工机械>>旋挖钻机>>

宇通重工YTR360C履带式旋挖钻机


YTR360C
履带式旋挖钻机
YTR360C Crawler Type Rotary Drilling Rig
一、  产品性能特点
I.      Product Performance Features
1、      原装进口CAT349D底盘:采用C-13 ACERT电喷涡轮增压中冷发动机,双回转减速机为钻机工作时提供足够大的回转制动力矩;
1.        CAT349D chassis imported with original packaging: It adopts C-13 ACERT electronic fuel injection turbo-supercharging inter-cooling engine. Double rotation reduction gear provides sufficient rotation braking torque for the drilling rig in course of working;
2、      后置单层绕绳卷筒:延长了钢丝绳使用寿命,力士乐双减速机双马达,主卷扬最大提升力达到350 kN,最大提升速度达到63 m/min;
2.        Postposition single layer winding coiling block: It prolongs the service life of the steel rope. Rexroth dual reduction gears and dual motor are mounted. The lifting power of main winch reaches 350kN and maximum lifting speed reaches 63m/min;
3、      强劲钻进动力:采用国际知名品牌的三组马达减速机,最大输出扭矩360 kN.m;最大加压力为240 kN的加压卷扬高效匹配,为旋挖钻机入岩助一臂之力;
3.        Strong drilling power: It adopts three groups of motor reduction gears with internationally famous brand and the maximum output torque reaches 360kN.m; it is equipped with pressing winch and the maximum pressing power is 240kN. It helps the rotary drilling rig to drill into the rock.
4、      精密电气系统:采用派芬控制系统,高档进口TTC控制器,显示器及控制、数据采集元器件,显示器配合桅杆操纵手柄系统可实现起桅、纠偏等手动动作,并具备自动立桅、调垂功能。
4.        Precise electric system: It adopts Pal-Fin control system, top grade imported TTC controller, display and control, data acquisition components. The mast control handle system can realizes the manual operation of raising the mast, and rectify the deviation coordinating with the display. It possesses the function of automatically mast raising and vertical adjustment.
5、      稳定液压系统:采用大排量液压泵,LUDV负载敏感系统、先导控制回路,独立的液压冷却系统,节能高效。液压马达、减速机、各种液压阀、油管及接头等均选用国际品牌产品,确保整机性能的稳定和高可靠性。
5         Stable hydraulic system: It adopts large displacement hydraulic pump, LUDV load sensing system, pilot control return circuit reduction gears and independent hydraulic cooling system with the advantage of energy saving and high efficiency. Hydraulic motor, reduction gears, all kinds of hydraulic valves, oil pipes and joints etc are products of international brands so as to ensure the stability and high reliability of the complete vehicle performance.
三、  整机性能参数
III.   Overall Performance Parameter

YTR360C履带式旋挖钻机主要技术参数
Main Technical Parameter of YTR360C Crawler Type Rotary Drilling Rig
最大钻孔直径
Maximum Drilling Diameter
mm 2500
最大钻孔深度
Maximum Drilling Depth
m 100
发动机
Engine
型号
Model
C13 ACERT电喷
C13 ACERT Electric Fuel Injection
生产厂家
Manufacturer
卡特
Caterpillar
配置功率
Power
kW 328
动力头
Power Head
最大输出扭矩
Maximum Output Torque
kN.m 360
钻孔速度
Drilling Speed
r/min 5~23
加压卷扬
Pressing Winch
最大压力
Maximum Pressure
kN 240
最大提升力
Maximum Lifting Power
kN 240
加压行程
Pressing Stroke
mm 8000
主卷扬
Main Winch
提升力
Lifting Power
kN 350
最大提升速度
Maximum Lifting Speed
m/min 63
钢丝绳直径
Steel Rope Diameter
mm 36
放置位置
Laying Position
后置
Postposition
副卷扬
Auxiliary Winch
提升力(第一层)
Lifting Capacity (First Layer)
kN 120
最大提升速度
Maximum Lifting Speed
m/min 70
钢丝绳直径
Steel Rope Diameter
mm 20
底盘
Chassis
型号
Model
CAT349D
履带板宽度
Crawler Plate Width
mm 800
牵引力
Traction
kN 710
底盘长度(轮距)
Chassis Length (Wheel Tread)
mm 5000
外形尺寸
Overall Dimension
工作状态设备宽度
Equipment Width at Working State
mm 4400
工作状态设备高度
Equipment Height at Working State
mm 27000
运输状态设备长度
Equipment Length at Travel State
mm 18500
运输状态设备高度
Equipment Height at Travel State
mm 3600
运输状态设备宽度
Equipment Width at Travel State
mm 3000
重量
Weight
工作状态
Working State
t 115
运输状态
Travel State
t 70
标配钻杆规格
Standard Drill Pipe Specification
16米6节φ508摩阻式钻杆
16m 6-section φ508 friction drill pipe
最长钻杆规格
Longest Drill Pipe Specification
18米6节φ508摩阻式钻杆
18m 6-section φ508 friction drill pipe
 
 (来源:宇通重工)
上一篇:宇通重工YTR280C旋挖钻机
下一篇:没有了




发表评论
请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
评价:

品牌推荐



友情链接